National Construction Code 2019 Industry Guide
Posted Friday 06 December 2019
Implementing imaginative, resourceful and welcoming lighting installations may become more of a challenge for designers and installers under the revised energy efficiency provisions (i.e. Part J6) of Volume One of the National Construction Code (NCC) 2019. However, there are a number of aspects of the new Code that can be utilised to enable higher levels of lighting power to be applied in order to achieve the outcomes expected in quality architectural schemes.
LED Buyer’s Guide
Posted Thursday 13 December 2018
Buying replacement lamps is no longer simply a matter of matching wattage. LED technology has unlocked a world of energy efficiency and new products, however consumers must be more aware of the issues concerning quality lighting to make informed decisions. This guide aims to help residential consumers choose replacement LED products when considering a range of factors.
Choosing a Product Standard and AS/NZS 3820
Posted Thursday 23 Aug 2018
Some electrical products have Australian and international standards that outline criteria for verifying safety of these particular products. Lighting equipment often has a specific standard that should be used to demonstrate compliance with electrical safety above the basic requirements outlined in AS/NZS 3820.
Changes to LED Lamp Regulations
Posted Wednesday 15 Aug 2018
Changes to the risk level categorisation of LED lamps means pre-market testing, marking and certification are now required to comply with electrical safety regulations. Wholesalers, retailers and electrical contractors should be aware of their obligations.
Australian Equipment Lighting Regulations
Posted Monday 01 Jan 2018
Suppliers of lighting equipment in Australia are subject to a collection of state and federal acts, regulations and standards relating to electrical safety, electromagnetic compatibility, energy efficiency regulations and more.
Regulatory Compliance Marking
Posted Monday 01 Jan 2018
This light technical explains usage of the Regulatory Compliance Marking regarding electrical safety and electromagnetic compliance.
Upgrading from Mercury Vapour Lamps
Posted Thursday 01 Mar 2018
With the phase-out of mercury containing lamps occurring in major economies around the world, street and commercial lighting owners will be faced with the decision to upgrade entire light fittings or only replace the lamp with LED technology. This brief outlines some of the factors to consider when making this decision.
Replacing MR16 Halogen Lamps with LEDs
Posted Thursday 04 Sep 2014
Replacing MR16 Halogen Lamps with LEDs provides guidance to users wishing to replace the common 50W or 35W MR16 dichroic lamps with LED MR16 lamps. The technical bulletin addresses compatibility issues between LED MR16 lamps and the wide range of transformers and dimmers in the Australian marketplace, provides a set of principles to follow when replacing MR16 halogen lamps with LED MR16 lamps and lists basic installation instructions. The bulletin also provides a comprehensive table comparing the characteristics of LED MR16s with MR 16 halogen lamps.